All

An Alloy Header Tank for BMW Mini 2007 onwards Cooper S Models. Hand crafted and polished in the UK making for an easy fitment and replacement. If you are unsure if this product is suitable for your application, please contact us.  FITS: R55 CLUBMAN  R56 HATCHBACK R57 CONVERTIBLE R58 COUPE R59 ROADSTER     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

THIS ITEM IS NONE RETURNABLE The ECS Tuning Front Mount Intercooler (FMIC) Kit boosts power and lowers intercooler outlet temps by maximizing core volume and more efficiently dispelling heat over the OEM sandwich-mounted intercooler. The factory intercooler is positioned between two hot heat exchangers, the A/C Condenser and Radiator, and suffers from an undersized and underperforming tube and fin core from the factory. Upgrading the OE-location intercooler is difficult for most hobbyists and is hidden within the core support. An alternative choice is our In-House Designed and Engineered FMIC Kit which relocates the charge cooler front and center, right behind your front bumper cover for maximum available airflow while moving it away from the hot heat exchangers inside the engine bay, all while adding an aggressive appearance to your turbocharged VW!  Our design features high quality cast aluminum end tanks with an integral flow divider on the inlet for even flow distribution, a massive 26” x 7 ⅞” x 3.0” (614.25 in.³ volume) aluminum bar and plate core, which lends to an increase in volume of +19.78% over the OEM GTI intercooler, for maximum heat dissipation, bolt-on powder-coated steel brackets, which require absolutely NO drilling or cutting, and 5-ply pre-molded silicone couplers with T-Bolt hose clamps. Our intercooler was in-house engineered to provide a bolt-on cooling solution for the VW MK7 GTI and Golf R market. Through our in-house evaluation on our ECS Shop MK7 GTI, we measured an increase of +24 WHP @ 6,400 RPM and +18 WTQ @ 6,375 RPM along with an increase of 19% in cooling efficiency and 80° F. lower intercooler outlet temperatures after 3 consecutive dyno pulls.    PART DESIGN INTERCOOLER 3D CAD designed to allow the largest intercooler possible without permanent modifications (no cutting or drilling)  Aluminum Straight Vane Bar and Plate Core - 26” x 7 ⅞” x 3.0” (614.25 in.³ internal core volume)  Raw Cast Aluminum End Tanks with smooth flowing internal inlet and outlet flow-paths  Cast 2.50" barbed connections keep hoses secured and minimizes the risk of hoses blowing off Internal flow divider on intercooler inlet for even flow distribution between the intercooler core  End tanks are tig welded to the intercooler core and the complete assembly is pressure tested to 3.5 BAR at 0% leak down to ensure sealing capacity Cast mounting features supply our bracketry with a rigid mounting point  MOUNTING BRACKET KIT Our unique design to mount the intercooler makes this kit truly remarkable! By bolting our brackets to the lower crash beam bolts, absolutely no drilling into your core support or drilling into your beam are required! Simply remove your lower crash beam bolts to install our brackets. The beam does NOT need to be removed.  Made from rigid ⅛” thick steel then powder-coated wrinkle-black for corrosion protection  Pre-installed zinc-plated rivet nuts make for a simple bolt-on solution to our intercooler with our included stainless steel bolts and washers  Included in the kit are our horn brackets which position the horns closer to the beam to make way for silicone charge pipe routing.  A pre-welded tab on the driver's side bracket maintains a mounting point for the ambient air temperature sensor bracket.  SILICONE COUPLERS Pre-molded and held to tight tolerances to achieve the best flow possible while navigating the tight areas within the MK7's front end  Made from heavy-duty, 5-ply fiberglass reinforced silicone for burst resistance. Capable of handling 250° F. operating temperatures and over 45 PSI.   Smooth internal passageways and smooth bends keep airflow at peak for the greatest level of performance    KIT CONTENTS ECS Front Mount Intercooler ECS Direct-Fit Mounting Bracket Kit with Mounting Hardware ECS Silicone Couplers with T-Bolt Hose Clamps    PERFORMANCE FEATURES Dyno tested on our In-House Mustang Dyno on our shop 2015 MK7 GTI 2.0T 6 speed manual, comparing OEM GTI intercooler to ECS FMIC. Please see our documented results under the INSTALLATION Tab for more information.  Vehicle Modifications: APR Stage 2 Hi-Torque 93 Octane Tune, Milltek 3.0" Catted Turbo-Back Exhaust, ECS Kohlefaser Luft-Technik Intake, ECS Charge Pipes  +24 WHP @ 6,400 RPM and +18 WTQ @ 6,375 RPM 15° Fahrenheit lower intercooler outlet temperature drop over 3 consecutive dyno pulls 80° Fahrenheit lower intercooler temperature rise over 3 consecutive dyno pulls  +19% more efficient at 6,250 RPM (+4% at lower engine speeds, ~3,250 RPM) 0.5 PSI lower pressure drop at 6,250 RPM   PRODUCT DEVELOPMENT Our ECS Front Mount Intercooler Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your front bumper cover in detail! See our Installation PDF under the INSTALLATION Tab for more information. No cutting, drilling or any other permanent modifications are required for intended fitment.  Vehicles with SAI (Secondary Air Injection) will need to bend the wiring harness bracket 45° to clear silicone coupler. This can easily be bent to original form if ever desired.  Be advised this will NOT FIT pre-facelift MK7s with forward collision warning radar (large black sensor in lower, center bumper grille).  Cross Reference FMIC, charge cooler This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant union is subject to a lot of heat, becoming brittle and failing over time. Upgrading to the Billet Coolant Vent Union minimizes the risk of coolant leaks, enhancing the reliability of your EA888!The 034Motorsport Billet Coolant Vent Union is machined from billet 6061-T6 aluminum, which is ideal for components exposed to high temperatures and harsh operating conditions. The Billet Coolant Vent Union is then black anodized for long-lasting looks and corrosion resistance to ensure that this upgrade is able to withstand the high temperatures next to your turbocharger. FEATURES: CNC Machined From Billet 6061-T6 Aluminum Black Anodized for Long Lasting Good Looks and Corrosion Resistance New O-Ring Preinstalled Direct Replacement of OEM Component WHAT’S INCLUDED: 034Motorsport Billet Coolant Vent Union 1x O-Ring Preinstalled VEHICLE FITMENT FOR: Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Volkswagen/Passat B8 Shop By Car/Audi/Q5 (B9) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/Volkswagen/Beetle (16) Shop By Car/Audi/S3 (8Y)

Read more less

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of manually removing these deposits can be difficult, time consuming, and expensive. The 034Motorsport Direct Injection Head Port Cleaning Tool makes short and easy work of removing these deposits from your intake ports and valves. The tool has a small port for a media blasting wand and a large port that connects to a shop vacuum hose. The vacuum generated by the shop vac holds the tool in place up against the intake port, freeing your hands to focus on the media blasting. To use, simply rotate the crankshaft to close the intake valves in a given intake port before positioning the Direct Injection Head Port Cleaning Tool on the intake port. Turn on the vacuum and media blast away. All of the blasting media is sucked into the shop vac, making the entire process quick and easy, with little to no clean-up necessary afterwards. Features:Machined from Billet 6061-T6 Aluminum For DurabilityClear Anodized for an Attractive, Corrosion Resistant FinishFits Standard 40mm (1 1/2") ShopVac HoseAccommodates Media Blast Wands Up to 10mm (3/8") in DiameterMakes Carbon Cleaning of Direct Injection VAG Engines Much Easier and Faster What's Included:Direct Injection Head Port Cleaning Tool (x1)Lots of Additional Free Time Fitment Guide:See Fitment Guide Tab for Extensive List of Applications Frequently Asked Questions:Does this fit the cylinder head without injector removal? - YESDoes this fit the B7 RS4 heads without injector removal? - YESNote: For 2.0 motors, it is easier to use this tool with the injectors removed, and the 2.0 injectors are easy to remove.   Suitable for: Shop By Car/Audi/RS7 (C7) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Car Care/Tools Shop By Car/Audi/A6 (C6) Shop By Car/SEAT/CUPRA/Exeo Shop By Car/Skoda/Roomster Shop By Car/SEAT/CUPRA/Ibiza Mk5 (6J) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/S4 (B7) Shop By Car/Audi/S4 (B6) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/R8 Mk1 (42 06-15) Shop By Car/Audi/A8 Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Skoda/Fabia Mk3 (NJ) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Golf Mk5/Maintenance / Tools Shop By Car/Audi/S3 (8V)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Ateca Shop By Car/Audi/Q2 Shop By Car/Audi/S6 (C7) Shop By Car/Volkswagen/Golf Mk7/Maintenance / Tools Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kamiq Shop By Car/Volkswagen/Golf Mk6/Maintenance / Tools Shop By Car/Skoda/Octavia Mk3 (5E)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk2 (5J)/Maintenance / Tools Shop By Car/Audi/S6 (C6) Shop By Car/Audi/A3 (8P 03-13)/Maintenance / Tools Shop By Car/Audi/A3 (8V 12-20)/Maintenance / Tools Shop By Car/Audi/S3 (8P)/Maintenance / Tools Shop By Car/Audi/TT Mk3 (8S)/Maintenance / Tools Shop By Car/Audi/S5 (B8)/Maintenance / Tools Shop By Car/Audi/TT RS (8J)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk1 (6Y)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Maintenance / Tools Shop By Car/Volkswagen/Beetle (16)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Formentor Shop By Car/Audi/RS6 (C7)/Maintenance / Tools     Code: 034-034-108-Z054

Read more less

034Motorsport's Carbon Fiber Fresh Air Duct is now available for the 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R! Designed to better route cool, dense air from the front of the car to the airbox. This high-quality carbon fiber piece offers OEM+ fit and finish, and is the perfect match for your X34 MQB Air Intake. Unlike the factory plastic air duct, the 034Motorsport Carbon Fiber Fresh Air Duct provides a smooth, direct path for air to enter the airbox from behind the factory grille. In addition to allowing for more airflow to the factory airbox, the Carbon Fiber MQB Fresh Air Duct also yields a noticeable improvement in induction and turbocharger sounds. Features: High Quality Carbon Fiber Construction OEM+ Fit & Finish Improves Airflow from Front of Vehicle to Airbox Eliminates Factory Plastic Blockoff at Core Support Increases Induction & Turbocharger Sounds Offers Simple, Bolt-In Installation What's Included: 034Motorsport Carbon Fiber Fresh Air Duct Self-Adhesive Coolant Hose Clamps (Set of 2) Installation Instructions: Click Here!

Read more less

034Motorsport's Motorsport StreetSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport StreetSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is slightly higher than stock. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Version Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts

Read more less

The Motorsport Line StreetSport Motor Mount Retrofit Kit for the Audi/VW MQB chassis is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is only slightly higher than stock. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Converts TrackSport Mounts to StreetSport Mounts to Lower NVH Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Versions Virtually Indestructible Lifetime Warranty Updates One Set of Engine/Transmission HARDWARE REQUIREMENTS: This product is intended to be used in conjunction with one of the following products. The mount bases of the kits shown below are swapped with the mount bases in this kit, resulting in the same spec as our StreetSport mounts. 034-509-5028 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V/8V.5 A3/S3, 8S TT/TTS, and VW MkVII Golf/GTI/R 034-509-5030 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V.5 RS3 and 8S TTRS EVO DAZA NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/RS3 (8V)/Engine Mounts Shop By Car/Audi/TT RS (8S)/Engine Mounts Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts

Read more less

034Motorsport's Motorsport TrackSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport TrackSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These extreme-duty mounts will increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Racing and Extreme Performance Applications Great Solution for Highly-Tuned Stock Turbo and Big Turbo Power Levels Replaceable 65 Durometer Density Line Rubber Bushings with Void-Free Construction Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/RS3 (8V)/Engine Mounts Shop By Car/Audi/TT RS (8S)/Engine Mounts Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4

Read more less

1.0 EcoBoost Crossover pipe - Fiesta Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket! Want it fitted by CEUK? We can fit the Hose And/Or Induction kit from £25 + Vat - give us a call on 0843 289 0182 to arrange. The new CEUK 1.0 Crossover pipe sits between the primary and secondary induction hose on the  cylinder 1.0 engine, and allows more air to pass around your intake system thus giving more power  Improved induction sound as you will hear the air passing through when accelerating and will assist giving a greater blow off sound from your induction kit Features: Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Optional CEUK Logo in numerous colours Fits all Fiesta Mk7/7.5 and Focus MK3 1.0 Eco Boost 100 ps and 125ps, 140ps models  Have you been #Enhanced?

Read more less

Enhanced Performance Turbo Hard pipe for all models of 1.0 EcoBoost A high flow turbo pipe, improving pressure drop across the charge system which in turn improves the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel, this pipe comes off the turbo and connects to the charge silicone hose going to the intercooler. Compatible with the following models: Fiesta MK7 1.0 EcoBoost 100ps Fiesta MK7 1.0 EcoBoost 125ps Fiesta MK7 1.0 EcoBoost 140ps Focus MK3 1.0 EcoBoost 100ps Focus MK3 1.0 EcoBoost 125ps Focus MK3 1.0 EcoBoost 140ps Fiesta MK8 1.0 EcoBoost 100ps Fiesta MK8 1.0 EcoBoost 125 ps Fiesta MK8 1.0 EcoBoost 140ps

Read more less

Adjustable Actuator for Subaru IHI VF35/VF34 Turbo GDB - However, this is not suitable for spec C. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC2SUB Actuator1 x Forge Sticker fits: AudiA32.0 FSiTTTMk22.0SeatLeonMk2 2005-2012Cupra 2.0 TFSiSkodaOctavia2.0 FSiTVolkswagenEOSGolfMK5GTIPassat2.0 FSiTTiguan 2.0 FSiT   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Help your 1.0 EcoBoost get a much Air into the engine as possible! Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2  Features Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Increased induction noise AIRTEC induction kit recommended Fits: MK7 Fiesta 1.0 EcoBoost All Models MK3 Focus 1.0 EcoBoost All Models MK8 Fiesta 1.0 EcoBoost All Models (Front Turbo Only)

Read more less

The Ultimate alloy Turbo top induction pipe Mirror finish , the ultimate finishing touch to any engine bay! Now available in 3 different finishes, Pro-Series Satin Black, Polished Silver and the new Satin Silver (Motorsport Style Finish) Fitting takes about 20-30 minutes Registered Design Right number: 6033438

Read more less

  Big boost pipe kit for the Fiesta ST 180. The kit includes: 3 hard pipes, 4 Pro Hose silicone hoses & free jubilee clips. This kit is designed for the modified fiesta ST 180. All pipes have swayed  ends to stop the pipes blowing off. Available with or without symposer take off. Please note: If fitting with the AIRTEC Motorsport Stage 2 intercooler, please make a note in the shipping notes – Additional hose required.     2.5" bore pipework. only available in black pipe and black hose Will fit Fiesta ST 200

Read more less

IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. We’ve taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator. Features:– Silicone diaphragm with Nomex reinforcement to withstand high temperatures.– High grade, billet aluminium construction.– Stainless steel rods and connecting clevis for corrosion resistance.– Locking Collar design cap allows for quick spring changes (Options from 3psi to 26psi available).– AIRTEC Branded product Ideal for use with any Turbosmart boost controller. Please note: Pictures are library pictures and may not relate to actual product. AIRTEC part no: TS-0941-1010

Read more less

A direct replacement part that gives increases in response and sound by eliminating the internal sound resonators built into the original boost pipe from the turbo.  The manufacturer fits these resonators to reduce noise and quieten the tone, but by replacing the pipe for one without the baffled internals, flow is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The pipe is made from high-quality aluminium to fit the original fittings and is finished in powder coated black or metal silver. The installation package includes all fixtures and fittings, as well as detailed installation instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification Will fit Ford 1.6 TDCI engines including Focus MK3 1.6 & Transit M Sport Connect. Features: Increases response and sound Improves flow from turbo Direct replacement fitment High quality aluminium construction Powder coat black or metal silver finish Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSFO70

Read more less

Kit Includes.Modified Earl’s TEMP-A-CURE™ oil cooler, with CNC billet mounting plate, has mounting points for RS & ST applications.CNC remote oil cooler engine plate, Anodised Black with engraved logoAeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hoseBillets anodised Black hose line seperators x 4Gearbox mounted hose securing bracket finished in ProSeries BlackHorn Relocation Mounting bracket, finished in Pro-Series Satin Black Long overdue but it’s been worth the wait, making every part of our oil cooler kit unique and finished to a stunning level of quality.Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filtersEarl’s TEMP-A-CURE™oil cooler. Today’s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for “normal” driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. Earl’s offers the solution to marginal cooling systems—race proven lightweight and efficient oil coolers designed to fit in the smallest practical space.Please note: PRE-Facelift Focus ST will require cutting behing the grille.Will not fit pre-facelift without cutting.

Read more less

AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh) Features: High quality hard pipe Easy to fit Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).

Read more less

Focus ST Full ECU cover for cold feed Air filter kits. in pro- series black  Covers up old ECU & also act's as a bracket for the ECU.  Comes with high voltage warning logo & information logo. Made from stainless steel, not alloy like other cheap over priced covers!

Read more less

Focus ST225 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance. The cold air feed comes with Cold feed guide which sits just below the filter securing the trunking. Each kit comes with a 780mm piece of ducting, 1 base plate with attached ram pipe and all required bolts and fixings. PLEASE NOTE: Silver finish is for illustrative purposes only.

Read more less

As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the i20N, suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow begins at 43mm from the turbo inlet and gradually tapers up to just 53mm in diameter as it reaches the induction pipe work. This causes an unnecessary restriction within the intake side that hampers flow and limits throttle response. Our AIRTEC Motorsport direct replacement cast aluminium elbow gently tapers from the turbo inlet out to a huge 76mm diameter, an increase of over 50% compared to the original and an increase of 106% in cross-sectional area. This increased volume and improved design works to reduce restriction and improve flow to the turbo.   The kit also comes with a 76mm silicone connector, ensuring the diameter is maintained to the induction pipe, and includes all fixtures and fittings, as well as detailed instructions. Finished in powder coated black with a AIRTEC Motorsport cast logo, this uprated elbow upgrade offers a great benefit for modified i20N owners. Features:  50% increase in inlet diameter 106% increase in cross-sectional area Larger, freer-flowing design Improves air flow to the turbo Increases throttle response Direct replacement fitment Made from cast aluminium  High-quality powder coat black finish Includes all fixtures and a detailed fitting guide AIRTEC Part No: ATMSHYU17

Read more less

AIRTEC Motorsport Focus Mk2 ST/RS & Volvo C30 T5 Air-Con Delete Kit For those looking to extract the very best performance from their Mk2 Focus ST/RS or Volvo C30 T5, the AIRTEC Motorsport air-con delete kit helps to reduce engine parasitic loss, improving response and horsepower, as well as reducing unwanted weight and removing clutter from the engine bay. This comprehensive kit includes a carefully machined alloy pulley, to directly replace the air-con pump unit, along with specially crafted CNC machined brackets, new auxiliary belts and all of the fixtures and fittings required to safely remove the entire air-con system. Please note: This is recommended for Motorsport use only and is not intended for road use.Sump bolt will need to be removed, air-con delete kit adds adequate pressure due to the 3 point fixing system.

Read more less

The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better! Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models. The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky. AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance. The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination. Please note, this currently only fits AIRTEC’s Group A induction kit. Kit includes: 1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black 3x Billet alloy spacers and stainless-steel fittings Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models AIRTEC part no: ATMSFO45

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the E90, E92 and E93 M3 models. The front part of the original undertray on these cars is notoriously weak due to its fibre material construction and as a result is prone to failure over time. Our solution is a direct replacement, three-piece undertray made in aluminium that reuses all of the original mounting points to ensure a perfect and secure fitment. Unlike others on the market, the design of the oil cooler extraction ducting has also been carefully considered to imitate the original in order to maintain sufficient cooling. As a result, the sides of the ducts are enclosed against the oil cooler and the radius of the ducting increased in size. There are also brake duct cut outs to allow the use of a GT4-style splitter with brake cooling ducts. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. Features:•     Direct replacement for original E9x M3 undertray•     Made from high-quality aluminium for increased strength•     Uses all original mounting points – no cutting or drilling required•     Improved oil cooling extraction through enclosed ducting•     Allows for GT4-style splitter with brake cooling ducts•     Comes in a durable black powder coat finish•     Supplied with all fixtures and fittings•     Detailed installation instructions Registered Design Right number: Application Pending

Read more less